Products in the “Deluxe 3D BG's” Category

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Depending on your requirements, you may order any of the products with or without structure foam on the backside which makes the item rigid. These foamed backed items however, have been created predominately for reptile enclosures, and are NOT suitable for aquariums as they can give off toxins in the water, making it unsafe for the fish.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

This background measures 60" X 24" and only 9" at the thickest part. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds have plenty of room behind them for whatever equipment you want to hide. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

This background measures 23" X 21.5" and less then 1.5" thick. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds are flat on the backside and can be installed on the back glass or they can be moved forward as far as you want to give room for whatever equipment you want to hide. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

It''s a cool rock wall with lots of detail and realistic stone running the length of the background. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, pH neutral and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds are flat on the backside and can be installed on the back glass or they can be moved forward as far you want to give room for whatever equipment you want to hide. For installation they are glued in place on the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

These pieces can be installed in no time at all. This piece is made of revolutionary flexible material that is completely aquarium and reptile friendly and will have no impact on the color or quality of water. It is easily cleaned with water and stiff brush. It is very easy to cut and customize as needed using a utility knife. This piece will also sink right out of the box!! It can be installed with aquarium silicone or with enclosures with wood backs so you can use screws to secure them.

This background measures 78, 63, 48" X 24" and 3" thick. It's a cool rock wall with lots of detail and realistic stone running the length of the background. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds are flat on the backside and can be installed on the back glass or they can be moved forward as far as you want to give room for whatever equipment you want to hide. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

This background measures 48-78" X 24" and only 3" at the thickest part. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds are flat on the backside and can be installed on the back glass or they can be moved forward as far as you want to give room for whatever equipment you want to hide. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

It's a cool rock wall with lots of detail and realistic stone running the length of the background. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds have plenty of room behind them for whatever equipment you want to hide. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

This background measures 78" X 36" and less than 10" thick at the thickest part. It's a cool rock wall with lots of detail and realistic stone running the length of the background. These backgrounds were actually designed and molded from real rock walls to give a realistic and beautiful 3-D appearance. They add a touch of realism to create that natural biotope that can only be achieved with these backgrounds. All the materials used are non-toxic, Ph neutral, and can be cleaned with a soft bristle brush. These backgrounds are made of very high density polyurethane industrial foam. The backgrounds have plenty of room behind them for whatever equipment you want to hide
. For installation they are glued across the bottom and up the sides. The core of the backgrounds are colored black to hide any holes from pipes or hoses and also any damage that might happen down the road after installation. If you have any questions regarding installation, the product or need a custom size background please send us an e-mail or take a look in the tutorials section.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Depending on your requirements, you may order any of the products with or without structure foam on the backside which makes the item rigid. These foamed backed items however, have been created predominately for reptile enclosures, and are NOT suitable for aquariums as they can give off toxins in the water, making it unsafe for the fish.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide

•To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
•To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.

•Aquarium Background of certain style can be cut down to suit smaller tank.
•Rock can be cut to allow your animal to crawl or swim into for hiding etc.
•Cut to fit squarely into a corner.
•Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:

•A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
•Set square and marker - pencil, chalk etc.
•Tape measure to ensure you cut the correct placew and angle.
•Structual adhesive silicone.
•Screws and Screw driver.
•Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
•Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
•Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.

Colouring: All products are made in a standard Bushrock Colour that may vary as they are all individually hand coloured using crushed rock, sand and oxides. No paints are used in is this totally realistic process.

Material: Each item has been designed with our revolutionary flexible material, therefore allowing you to install into new or existing tanks with ease.

Depending on your requirements, you may order any of the products with or without structure foam on the backside which makes the item rigid. These foamed backed items however, have been created predominately for reptile enclosures, and are NOT suitable for aquariums as they can give off toxins in the water, making it unsafe for the fish.

Maintenance

Our products can be washed and scrubbed down with a stiff brush and appropriate cleaning agents not harmful to fish life.

We recommend you do all small trial of your cleaning agent in a inconspicuous area of your rock to make sure it does not dis-colour the rocks surface. We suggest that you wash your new rock before installing into your tank.

Installation Guide
To Secure your background in place simply use an Aquarium grade silcone adhesive and apply to the back of your background on the areas that protrude the most and touch the back of the enclosure. Prop in place until silcone dries.
To secure to wood, you can screw through the background into the wooden enclosure. Screw into inconspicuous areas of the rock formation. The screw head can then be camouflaged, using a dob of silicone and then matching sand sprinkled into it.
All products can be hand cut. This gives you the ability to tailor make our products to your needs.
Aquarium Background of certain style can be cut down to suit smaller tank.
Rock can be cut to allow your animal to crawl or swim into for hiding etc.
Cut to fit squarely into a corner.
Cut at different angles so that no 2 rocks look the same.

If alterations are required the following tools may be useful:
A sharp rigid blade/kitchen butcher's knife or a small toothed hand/jig saw.
Set square and marker - pencil, chalk etc.
Tape measure to ensure you cut the correct placew and angle.
Structual adhesive silicone.
Screws and Screw driver.
Sometimes pebbles maybe used to help weigh Aqua Rocks and Backgrounds into position. Simply place them on or push against certain parts on the rocks and backgrounds.
Small lights inside or behind certain rocks can create a beautiful effect.
Small water pumps can be used to create waterfalls running over any of the rocks. Just drill a hole in the desired place a put a pipe in from the outlet back to the pump.
Moss and other types of plants can and will attach themselves to the rocks.